2PS/2PT
1-4-5
4020 Registration sensor remain-
ing jam
The registration sensor (RS) is turned on when the
power is turned on.
C
4201 Eject sensor non arrival jam The eject sensor (ES) does not turn on during
paper feed from cassette.
C
4202 The eject sensor (ES) does not turn on during
paper feed from paper feeder 1.
C
4203 The eject sensor (ES) does not turn on during
paper feed from paper feeder 2.
C
4204 The eject sensor (ES) does not turn on during
paper feed from paper feeder 3.
C
4208 The eject sensor (ES) does not turn on during
paper feed from duplex section.
C
4209 The eject sensor (ES) does not turn on during
paper feed from MP tray.
C
4211 Eject sensor stay jam The eject sensor (ES) does not turn off during
paper feed from cassette.
D
4212 The eject sensor (ES) does not turn off during
paper feed from paper feeder 1.
D
4213 The eject sensor (ES) does not turn off during
paper feed from paper feeder 2.
D
4214 The eject sensor (ES) does not turn off during
paper feed from paper feeder 3.
D
4218 The eject sensor (ES) does not turn off during
paper feed from duplex section.
D
4219 The eject sensor (ES) does not turn off during
paper feed from MP tray.
D
4220 Eject sensor remaining jam The eject sensor (ES) is turned on when the power
is turned on.
D
Code Contents Conditions
Jam
location*
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-2).
To Next Page
Loading...
Need help?
General
