EasyManua.ls Logo

Vacon 100 - Page 36

Vacon 100
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
vacon • 34 Communications
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Instance Attribute “Run1”
The data type of this attribute is BOOL. The Attribute Identifier of this attribute is 3
d. This attribute
affects the run/stop behavior of the drive.
Instance Attribute “Run2”
The data type of this attribute is BOOL. The Attribute Identifier of this attribute is 4
d. This attribute
affects the run/stop behavior of the drive.
Instance Attribute “NetCtrl”
The data type of this attribute is BOOL. The Attribute Identifier of this attribute is 5
d
. This attribute
allows the network to request run/stop control to be assigned to the network. If the bit is 0, this
means that run/stop control is local. If the bit is 1, this means that run/stop control is requested to
this network interface.
It should be noted that the actual assignment of run/stop control to this network interface is
reflected in attribute 15
d
.
Table 22.
Class Name Control Supervisor Object
Class Identifier 29
h
Class Attributes Id Name Data Type Access Rule
- - - -
Class Services Id Name
- -
Instance Attributes Id Name Data Type Access Rule
3
h
Run1 Boolean Read-write
4
h
Run2 Boolean Read-write
5
h
NetCtrl Boolean Read-write
6
h
State Unsigned8 Read-only
7
h
Running1 Boolean Read-only
8
h
Running2 Boolean Read-only
9
h
Ready Boolean Read-only
0A
h
Faulted Boolean Read-only
0B
h
Warning Boolean Read-only
0C
h
FaultRst Boolean Read-write
0D
h
FaultCode Unsigned16 Read-only
0F
h
CtrlFromNet Boolean Read-only
Instance Services Id Name
5
h
Reset
0E
h
Get_Attribute_Single
10
h
Set_Attribute_Single

Other manuals for Vacon 100

Related product manuals