Vacon NX Active Front End User Manual

Control Keypad vacon • 71
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
6
6. CONTROL KEYPAD
The control keypad is the link between Vacon
®
NX Active Front End and the user. The Vacon NX
control keypad features an alphanumeric display with seven indicators for the Run status (RUN,
, READY, STOP, ALARM, FAULT) and three indicators for the control place (I/O term/ Keypad/
BusComm). There are also three Status Indicator LED’s (green – green – red), see Chapter 6.1.2.
The control information, i.e. the menu number, description of the menu or the displayed value and
the numeric information are presented on three text lines.
The Vacon
®
NX Active Front End is operable through the nine push-buttons of the control keypad.
Furthermore, the buttons can be used in setting parameters and monitoring values.
The keypad is detachable and isolated from the input line potential.

Vacon NX Active Front End Specifications

General

Brand	Vacon
Model	NX Active Front End
Category	Controller
Language	English