Vacon NX Active Front End User Manual

6
vacon • 86 Control Keypad
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
6.3.8.1 Selection of language
The Vacon NX control keypad offers you the possibility to control the inverter through the keypad in
the language of your choice.
Locate the language selection page under the System menu. It‘s location indication is S6.1. Press
Menu button right once to enter the edit mode. As the name of the language starts to blink you can
select another language for the keypad texts. Confirm with the
Enter button . The blinking stops and
all text information on the keypad are presented in the selected language.
You can return to the previous menu any time by pressing
Menu button left .
Figure 59. Selection of language
6.3.8.2
Copy parameters
The parameter copy function is used when the operator wants to copy one or all parameter groups
from one drive to another. All the parameter groups are first
uploaded to the keypad, then the
keypad is connected to another drive and then the parameter groups are
downloaded to it (or
possibly back to the same drive). For more information, see on Page 87.
Before any parameters can be successfully copied from one drive to another, the Active Front End
has to be stopped when the parameters are downloaded to it:
The parameter copy menu (S6.3) contains four functions:
Parameter sets (S6.3.1)
The user can reload the factory default parameter values and store and load two customised
parameter sets (all parameters included in the application).
On the Parameter sets page (S6.3.1), press
Menu button right to enter the edit mode . The text
LoadFactDef
begins to blink and you can confirm the loading of factory defaults by pressing the
Enter button. The drive resets automatically.
Alternatively, you can choose any other storing or loading functions with the
Browser buttons .
Confirm with the
Enter button . Wait until 'OK' appears on the display.
System Menu
S1  S11
READY
I/Oterm
Language
English
READY
I/Oterm
Language
English
READY
I/Oterm
enter
READY
I/Oterm
Francais
Langue
11197.emf

Vacon NX Active Front End Specifications

General

Brand	Vacon
Model	NX Active Front End
Category	Controller
Language	English