Vacon nxp/c User Manual

9
vacon • 86 CONTROL KEYPAD
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Figure 52. Storing and loading of parameter sets
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all
existing parameter groups to the keypad provided that the drive is stopped.
Enter the
To keypad page (S6.3.2) from the Parameter copy menu . Push the Menu button right to
enter the edit mode. Use the
Browser buttons to select the option All parameters and press the
Enter button . Wait until 'OK' appears on the display.
Figure 53. Parameter copy to keypad
Download parameters to drive (From keypad, S6.3.3)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided
that the drive is in STOP status.
Enter the
From keypad page (S6.3.3) from the Parameter copy menu . Push the Menu button right
to enter the edit mode. Use the
Browser buttons to select either the option All parameters or
Application parameters and press the Enter button . Wait until 'OK' appears on the display.
The procedure to download the parameters from keypad to drive is similar to that of from drive to
keypad. See above.
Automatic parameter backup (P6.3.4)
On this page you can activate or inactivate the parameter backup function. Enter the edit mode by
pressing the
Menu button right . Choose Yes or No with the Browser buttons .
READY
READY
enter
READY READY
OK
Parameter sets
Select
Parameter sets
CANCEL
CONFIRM
Parameter sets
Wait...
Parameter sets
LoadFactDef
11536_uk
P1

P4
READY
READY READY
enter
READY READY
Copy Parameters
Up to keypad
Up to keypad
Select
CANCEL
CONFIRM
Up to keypad
Wait...
Up to keypad
OK
All param.
CHANGE VALU
E
11537_uk

Vacon nxp/c Specifications

General

Brand	Vacon
Model	nxp/c
Category	Controller
Language	English