Vacon OPTA2 User Manual

3
vacon • 52 Descriptions of VACON® option boards
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
OPTAN board I/O monitor values
7.1.1.4 AO2 mode 1 5 3
1 = 0...20mA
2 = 4...20mA
3 = 0...10V
4 = 2...10V
5 = -10...+10V
Table 22. OPTAN board monitor values
Number Parameter Description
7.1.2.1 DigIN:A.1 DIN1 Status
7.1.2.2 DigIN:A.2 DIN2 Status
7.1.2.3 DigIN:A.3 DIN3 Status
7.1.2.4 DigIN:A.4 DIN4 Status
7.1.2.5 DigIN:A.5 DIN5 Status
7.1.2.6 DigIN:A.6 DIN6 Status
7.1.2.7 DigIN:A.8 Not in use
7.1.2.8 DigOUT:A.1 Not in use
7.1.2.9 AnIN:A.1 AI1 Status
7.1.2.10 AnIN:A.2 AI2 Status
7.1.2.11 AnOUT:A.1 AO1 Status
7.1.2.12 AnOUT:A.2 AO2 Status
Table 21. OPTAN board-related parameters
Number Parameter Min Max Default Note

Vacon OPTA2 Specifications

General

Brand	Vacon
Model	OPTA2
Category	Controller
Language	English