Chapter 1 ________________________________________________________ General Information
VAISALA ________________________________________________________________________ 9
Safety
The DPT146 delivered to you has been tested for safety and approved as
shipped from the factory. Note the following precautions:
WARNING
Ground the product and verify outdoor installation grounding
periodically to minimize shock hazard.
CAUTION
Do not modify the unit. Improper modification can damage the product
or lead to malfunction.
CAUTION
Do not drop or hit the transmitter. The sensor is fragile and may break
from a sudden shock.
When transporting the transmitter, use the original shipping box from
Vaisala.
ESD Protection
Electrostatic Discharge (ESD) can cause immediate or latent damage to
electronic circuits. Vaisala products are adequately protected against
ESD for their intended use. It is possible to damage the product,
however, by delivering electrostatic discharges when touching,
removing, or inserting any objects inside the equipment housing.
To make sure you are not delivering high static voltages yourself:
- Handle ESD sensitive components on a properly grounded and
protected ESD workbench.
- When an ESD workbench is not available, ground yourself to the
equipment chassis with a wrist strap and a resistive connection cord.
- If you are unable to take either of the above precautions, touch a
conductive part of the equipment chassis with your other hand before
touching ESD sensitive components.
- Always hold component boards by the edges and avoid touching the
component contacts.
To Next Page
Loading...
