Vaisala GMW95 - Appendix Abacnet Reference; Bacnet Protocol Implementation Conformance Statement

User's Guide _______________________________________________________________________
84 ___________________________________________________________________ M211659EN-C
APPENDIX A
BACNET REFERENCE
This appendix describes the BACnet protocol implementation of the
GMW90 series digital transmitters.
NOTE
For more information on BACnet, refer to addendum D of the
ANSI/ASHRAE standard 135-2001: BACnet
®
—A Data Communication
Protocol for Building Automation and Control Networks.
NOTE
Serial line settings such as baud rate are configured using DIP switches.
See section Configuration of Digital Output Models on page 21.
BACnet Protocol Implementation Conformance
Statement
This statement is a part of the BACnet standard and is required for its
use.
Vendor Name:
Vaisala Oyj
Product Name:
XMW90
Product Model Numbers:
GMW95 | GMW95R
Applications Software Version:
1.1.28 and later
Firmware Version:
1.1.0.0 and later
BACnet Protocol Revision:
Version 1, Revision 4
BACnet Standardized Device Profile
(Annex L):
 BACnet Operator Workstation (B-OWS)
 BACnet Building Controller (B-BC)
 BACnet Advanced Application Controller (B-AAC)
 BACnet Application Specific Controller (B-ASC)
 BACnet Smart Sensor (B-SS)
 BACnet Smart Actuator (B-SA)
List of all BACnet Interoperability
Building Blocks Supported
(Annex K):
See also section
BIBBs Supported on
page 95.
DS-RP-B, DS-RPM-B, DS-WP-B, DS-COVU-B,
DM-DDB-B, DM-DOB-B, DM-DCC-B, DM-RD-B