2. Planning the installation
2.1 Installation safety
Read the product documentation carefully before installing or
operating the product. If you encounter the following marking during
installation or operation, consult product documentation to find out the nature
of the potential hazards and any actions which have to be taken to avoid them:
WARNING!
Only licensed experts may install electrical components. They
must adhere to local and state legislation and regulations.
WARNING!
Make sure that you prepare and connect only de-energized wires.WARNING!
Keep away from live circuits. Operating personnel must observe
safety regulations at all times.
WARNING!
Ground the DGA monitor cabinets as instructed in the wiring
instructions. Verify the grounding before and after performing maintenance on
the unit.
WARNING!
Do not modify the DGA monitor or use it in ways not described in
the documentation. Modifications may lead to safety hazards, equipment
damage, failure to perform according to specification, or decreased equipment
lifetime.
CAUTION!
OPT100 Installation Guide M211857EN-R
10
To Next Page
Loading...