Vaisala Optimus OPT100 - Configuring Network Connection; Figure 30 IP Address Settings Page

1. In the top right corner, select Admin > Change password.
2. Enter the current password in Current password.
3. Enter the new password in New password and Confirm new password.
The new password must be at least 8 characters long.
4. Select Save.
5.4
Configuring network connection
Figure 30 IP address settings page
Configure the network settings of the external Ethernet connection (ETH0).
1. In the user interface, select Settings > Network > IP address.
2. Select if the external Ethernet connection should be Enabled or Disabled.
Chapter 5 – Commissioning
67