The default self-signed certificate is not trusted by connecting web browsers and
will give a warning that the connection is not secure. To remove the notification,
install a trusted TLS certificate (TLS 1.1 or 1.2) on the DGA monitor. However, note
that HTTPS trac is always encrypted even if the certificate is not trusted. Vaisala
recommends using encrypted connections (HTTPS).
1. In the user interface, select Settings > Network > Security.
2. Select HTTP to use unencrypted user interface connections, or HTTPS (default) to secure
the interface using encryption.
3. To use your own certificate with HTTPS connections:
a. Select Upload certificate.
b. Select Certificate file > Browse and locate the certificate file.
c. Select Private key file > Browse and locate the private key file.
d. Enter the Private key password if your private key requires it.
4. Select Apply to save your changes.
If you change the security settings, the user interface will restart and you
have to log in again.
Chapter 5 – Commissioning
69
To Next Page
Loading...