LigaSure Quick Setup Instructions
LigaSure Tissue Fusion
ForceTriad User’s Guide 6-3
LigaSure Quick Setup Instructions
If you are familiar with the ForceTriad energy platform, you may follow this
abbreviated procedure to setup the system for LigaSure tissue fusion.
If you are not familiar with the ForceTriad energy platform, refer to the following
sections in this chapter for detailed instructions.
1. Plug the system power cord into the rear panel receptacle.
2. Plug the system power cord into a grounded wall receptacle.
Note: Do not plug into a power strip or extension cord.
3.
Turn on the system and verify that the self-test has successfully completed.
4. If using a footswitch, connect it to the appropriate LigaSure footswitch
receptacle on the rear panel.
5. Connect the instrument or instruments to the LigaSure instrument receptacles
on the front panel.
6. Verify the bar setting.
To Next Page
Loading...
