Valor L2 SERIES User Manual

49
Installation
2. Mix the black and grey shale pieces and spread
them in one layer thick on top of the burner around
the three rocks. Do not overfi ll!
3. Install some of the rocks around the shale bed
according to the image shown below.
Note: Some of the rocks may overhang slightly over
the burner edge.
4. Add the twigs to the rocks
placing them as shown.
Note: The position of the twigs
are specifi c to obtain the best
fl ame pattern.
QUALIFIED
INSTALLER

Valor L2 SERIES Specifications

General

Venting	Direct Vent
Efficiency	Up to 80%
Model	L2 SERIES
Category	Fireplace Accessories
Brand	Valor
Fuel Type	Natural Gas or Propane