USER MANUAL
5.6.5.1 Upgrade IP Camera
1. Choose one of the IP cameras you want to upgrade firmware.
2. Click
Select File
select the update file from your USB flash drive, then click
OK
.
3. Click IPC Upgrade button to start upgrading. You will be required to input the Admin password
to authenticate. Please do NOT power off the DVR and IP camera or remove the USB during
the upgrading.
5.6.5.2 Load Default Settings for IP Camera
1. Choose the IP cameras you want to restore.
2. Click
Load Default
to restore settings.
You will be required to input the Admin password to
authenticate.
74
To Next Page
Loading...