VAMP 50 User Manual

Operation and configuration 2 Local panel user interface 2.4 Configuration and parameter
setting
2.4.2. Setting range limits
If the given parameter setting values are out-of-range values, a
fault message will be shown when the setting is confirmed with
the ENTER key. Adjust the setting to be within the allowed
range.
Figure 2.4.2-1 Example of a fault message
The allowed setting range is shown in the display in the setting
mode. To view the range, push the INFO key. Push the
CANCEL key to return to the setting mode.
Figure 2.4.2-2 Allowed setting ranges show in the display
2.4.3. Disturbance recorder menu DR
Via the submenus of the disturbance recorder menu the
following functions and features can be read and set:
DISTURBANCE RECORDER
 Recording mode (Mo
de)
 Sample rate (SR)
 Recording time (Time)
 Pre trig time (PreTrig)
 Manual trigger (ManTrig)
 Count of ready records (ReadyRec)
REC. CHANNELS
 Add a link to the recorder (AddCh)
 Clear all links (ClrCh)
VM50.EN004 VAMP 24h support phone +358 (0)20 753 3264
27

VAMP 50 Specifications

General

Brand	VAMP
Model	50
Category	Relays
Language	English