VAMP 50 User Manual

Operation and configuration 2 Local panel user interface 2.4 Configuration and parameter
setting
EXTERNAL I/O protocol
This is a Modbus master protocol to communicate with the
extension I/O modules connected to the extension port. Only
one instance of this protocol is possible.
 Bit rate [bit/s]. Default is "9600".
 Parity [Parity]. Default is "Even".
For details see the technical description part of the manual.
SPA BUS
Several instances of this protocol are possible.
 SPABUS address for this device [Addr]. This address has to
be unique within the system.
 Bit rate [bit/s]. Default is "9600".
 Event numbering style [Emode]. Default is "Channel".
For details see the technical description part of the manual.
IEC 60870-5-103
Only one instance of this protocol is possible.
 Address for this device [Addr]. This address has to be
unique within the system.
 Bit rate [bit/s]. Default is "9600".
 Minimum measurement response interval [MeasInt].
 ASDU6 response time mode [SyncRe].
For details see the technical description part of the manual.
IEC 103 DISTURBANCE RECORDINGS
For details see the technical description part of the manual.
VM50.EN004 VAMP 24h support phone +358 (0)20 753 3264
33

VAMP 50 Specifications

General

Brand	VAMP
Model	50
Category	Relays
Language	English