TROUBLESHOOTING AND MAINTENANCE : TROUBLESHOOTING
A
02.9671.0001 C 17-Sept-01 85
Troubleshooting
Protecting Your Warranty
When performing procedures outlined in the “Troubleshooting Guide” on page 86,
observe the following guidelines in order for your luminaire to remain covered by the
Vari-Lite Limited Warranty (included in product shipping container).
1. The luminaire enclosure, yoke, and head covers can be removed to check for
loose connectors or obvious signs of wiring, component, subassembly, power
supply, or PCB (printed circuit board) failure. Connectors can be removed
and reinstalled to check for bent pins or loose wire connections.
2. Disassembly of the luminaire beyond that outlined in (1.) above will void the
Vari-Lite Limited Warranty. Swapping of parts between luminaires for trou-
bleshooting purposes will void the warranty on each luminaire involved.
Ordering repair parts or returning subassemblies for repair will void the
warranty on the luminaire.
To Next Page
Loading...
