Vari Lite VL2402 - Page 108

VARI❋LITE® - VL2402™ WASH LUMINAIRE USER’S MANUAL
90 17-Sept-01 02.9671.0001 C
TILT
SENS
ACTV
Tilt Sensor Always Active Main board pan/tilt connector (J9)
disconnected
- Connect main board pan/tilt
connector (J9)
End-of-travel sensor connector (J2)
disconnected
- Connect end-of-travel sensor
connector (J2)
WAIT Retrieving Current Status System displays wait while getting
status.
WRNG
SW
PROG
Wrong Software Program Software installed does not match
luminaire type
- Download the correct software
for the luminaire
Table A-1: VL2402 Troubleshooting Guide (Continued)
Error Display Description Possible Cause and Remedy