Vari Lite VL2402 - Page 36

VARI❋LITE® - VL2402™ WASH LUMINAIRE USER’S MANUAL
18 17-Sept-01 02.9671.0001 C
3. While pulling up on locking mechanism release, fit keyed holes onto raised
mounting buttons at bottom of enclosure. Slide forward and release locking
mechanism to lock in place. Ensure brackets are locked securely. (Always
face brackets in same direction as shown.)
WARNING: Ensure that the bracket locking mechanism is fully seated after the
bracket is installed on the luminaire.
Truss Hook Bracket
Raised
Press up when
Once fitted over buttons,
slide forward to lock
in place
Locking Mechanism
Mounting
Face brackets in
same direction for
all configurations
Keyed Hole
Locked
installing or releasing
Button