Series 612 OPERATION
605262EE Edition 2018-08-20 79/
When communication to service port is interrupted the valve will change to remote
operation. So when service cable will be disconnected or software will be shut down,
the valve returns automatically to remote operation. This may result in an immediate
movement of the valve depending on remote control.
Refer to «Accessories» for ordering numbers of service cable and Service Box 2.
5.1.2 Remote operation
This product is equipped with a EtherCAT interface to allow for remote operation. See section «EtherCAT
interface» for details. 'Control Performance Analyzer' software or 'Service Box 2' may be used for
monitoring during remote control.
'Control Performance Analyzer' software
In case ‘Control Performance Analyzer’ software is connected to valve make sure
‘REMOTE’ button is pushed to enable for remote operation. In case Service Box 2
is connected to valve make sure the LED on button ‘LOCAL’ is OFF for remote
operation.
To Next Page
Loading...
