3. Before Installing the System
vatech A9 (Model: PHT-30CSS) Installation Manual 25
3. Before Installing the System
Before or during the installation, ensure to go over checklists
from No.3 to No.6 in Appendix E. Installation Checklist.
3.1 Required Tools
The following tools are required to install the vatech A9.
Item Figure Size
Wrench Set
1.5 mm -10 mm
(0.06” - 0.4”)
T-shaped Hex
Wrench
6 mm - 10 mm
(0.24” - 0.4”)
Hex Wrench w/
Handle
6 mm - 10 mm
(0.24” - 0.4”)
Ratchet Wrench
Tips: 3 mm - 8 mm
(0.12” - 0.3”)
Needle-nose Pliers
Regular
Monkey Wrench
N/A
Screwdriver w/
Magnetic Tip
L = 200 mm (7.9”)
Spirit Level
N/A
To Next Page
Loading...
