4. Installing the Equipment: Base Stand (Optional)
vatech A9 (Model: PHT-30CSS) Installation Manual 47
4. Put the four wrench bolts into each hole and tighten with an Allen Wrench to fix
the CEPH arms on the Main Unit.
Required Tool
Allen Wrench 6 mm / 0.24”
Allen Wrench 8 mm / 0.31”
Parts and
Accessory
Wrench Bolt
(w/ C E Washer)
M8 x 20 - 4 pcs
(Part No. 25)
C_E_Washer
4 pcs
(Part No. 25)
(If necessary) Place the Sprit level on the CEPH arm
and adjust the M8 x 20 bolts.
To Next Page
Loading...
