4. Installing the Equipment: Base Stand (Optional)
vatech A9 (Model: PHT-30CSS) Installation Manual 49
4.3 Installing the Wall and Column Brackets
Assembling the Column Bracket
The column bracket must be installed. Otherwise, the
equipment may vibrate during scanning.
1. Move the equipment close to the wall selected for the installation.
2. Remove the plastic wrap covering the Column Unit with a cutter.
3. Prepare the Column Bracket.
Parts and
Accessory
Column Bracket -
4. Assemble the column bracket on the back of the Column Unit using four Wrench
Bolt provided.
Required Tool Allen Wrench 6 mm / 0.24”
Parts and
Accessory
Wrench Bolt
M8 x 15 w/ Spring
and Flat Washers
- 4pc (Part No. 34)
To Next Page
Loading...
