Assembly 5
________________________________________________________________________________________
_______________________________________
5-13
5.2.2 Removing Axis Transportation Brackets
At this point it is possible to remove the axis transportation brackets after first
checking that the axis end limits (33) IMPORTANT!!!
These should be stored for any future transportation requirement.
Brackets are shown below: There are brackets on the X rails (41), either side of
the y-arm at the front and rear as well as brackets either side of the head on the y
rails (42).
DANGER!
Failure to secure the end stops (33) prior to removing the axis transport
brackets could result in death or severe injury due to the head running off the
end of the rails.
41
42
33
33
To Next Page
Loading...