_______________________________________
3
Contents .
CHAPTERS
4 Transport, offloading, setting up
4.1 General instructions 4 - 1
4.2 Space requirement 4 - 1
4.3 Setting up area 4 - 1
4.4 Sensitivity 4 - 1
4.5 Ambient conditions 4 - 1
4.6 Transport routes 4 - 1
4.7 Interim storage 4 - 2
4.8 Cleaning 4 - 2
4.9 Transport from packaging to location 4 - 2
4.9.1 Transport means 4 - 2
4.9.2 Offloading 4 - 2
4.9.3 Levelling 4 - 6
5 Assembly
5.1 General instructions 5 - 1
5.2 Machine Assembly 5 - 1
5.2.1 Re-fitting of components removed for transportation 5 - 1
5.2.1.1 Fitting of X-Axis drive motor 5 - 1
5.2.1.2 Fitting of rear X Axis cable chain and support 5 - 3
5.2.1.3 Fitting and tensioning of X Axis drive belt 5 - 5
5.2.1.4 Fitting and tensioning of Y Axis drive belt 5 - 6
5.2.1.5 Fitting X Axis counter 5 - 8
5.2.1.6 Fitting X Axis +ve and X Axis –ve limit switches 5 - 9
5.2.1.7 Fitting emergency stop pullwire 5 – 10
5.2.1.8 Fitting edgeband coil support 5 - 11
5.2.2 Removing the axis transport brackets 5 – 13
5.3 Machine connections 5 – 14
5.3.1 Electrical 5 – 14
5.3.1.1 Cross section of connection cabling and input pre-fusing 5 – 14
5.3.2 Pneumatic 5 – 14
5.3.3 Testing End-Limit switches 5 – 15
5.3.4 Testing Axis counting direction (X + Y) 5 – 16
5.4 Preparations for no-load tests without workpieces 5 - 17
5.4.1 Mechanical 5 - 17
5.4.2 Electrical (provided by others) 5 – 17
5.4.2.1 Checking the direction of rotation 5 – 18
6 Design and mode of operation
6.1 General description 6 - 1
6.2 Design 6 - 1
6.3 Mode of operation 6 - 2
7 Operation panel
7.1 Control fields / control elements 7 - 1
7.2 Definition of control elements 7 - 1
To Next Page
Loading...