28
Setup Vapor Recovery Setup
Figure 42. Verify Corrected Hose 3 Meter Map
Depending on changes made to an existing Hose Map, it may be necessary to select “Reset
Hose Map and Hose Settings” option in Actions, to default values, to clear the entire Hose
Mapping and Hose Setting screens. Then proceed to create all the Hoses in Hose Settings,
and re-map all the hoses in the Hose Mapping screen.
VAPOR MANAGEMENT
Processor
1. Touch Setup>Vapor Management>Processor (see Figure 43).
Figure 43. Vapor Management Setup Screen
To Next Page
Loading...
