16
0900‑5017‑ETEE REV‑05
SETTING UP
Please read the Hoiatused ja ettevaatusabinõud section before performing the following tasks.
If you choose to mount the Core 15 monitor on a Core workstation, it can be mounted only on part
number 0800‑0636.
IMPORTANT
Before you can use the system for the first time, you must inspect the components, set up the system, and
perform a functional test as recommended by Verathon. Complete the following procedures:
1. Perform Initial Inspection—Inspect the system for any obvious physical damage that may have occurred
during shipment.
2. Mount the System (Optional)—Set up the monitor on a mobile workstation.
3. Charge the Monitor Battery—You can use the system while the battery is charging.
4. Attach the Video Cable and Scope—Connect the appropriate video cable to the monitor, and then
connect the scope to the video cable.
5. Connect to an External Monitor (Optional)—Connect the monitor to an external display source, such as a
larger monitor screen, by using an HDMI cable.
6. Complete the Setup Wizard (Optional)—The Setup Wizard walks you through an initial system
configuration with settings such as the date, time, and system security code.
7. Configure User Settings (Optional)—Enter data customized to your clinic, and configure settings such as
the date, and time, video timestamps, and other administrative settings.
8. Perform a Functional Check—Before you use the device for the first time, perform a functional check to
ensure that the system is working properly.
PROcEDURE 1. PERFORM INITIAL INSPEcTION
When you receive the system, Verathon recommends that an operator familiar with the instrument perform a
full visual inspection of the system for any obvious physical damage that may have occurred during shipment.
1. Verify that you have received the appropriate components for your system by referring to the packing list
included with the system.
2. Inspect the components for damage.
3. If any of the components are missing or damaged, notify the carrier and Verathon Customer Care or your
local representative. For contact information, visit verathon.com/global‑support.
To Next Page
Loading...
Need help?
General
