Verathon GlideScope Core Service Manual

38
0900‑5017‑ETEE REV‑05
2. When you are finished recording, press the Record button again. The recording stops.
3. If you would like to save a photo of the live display, press the Snapshot button. A frame briefly
appears around the video to indicate the snapshot has been taken. This can also be done while the
recording video.
4. To create a patient note, press the Note Editor button. The Note Editor opens.
Note: If a video is recording, tapping the Note Editor button saves the video and opens the Note Editor.
5. For information on viewing the recorded files, continue to Procedure 6, Use the Gallery.
PROcEDURE 6. USE THE GALLERY
Please read the Hoiatused ja ettevaatusabinõud section before performing the following task.
Do not remove the USB flash drive while transferring files from the monitor to the USB.
IMPORTANT
AccESS THE GALLERY
• From the Home screen, tap the Main Menu button, and then tap the Gallery button.
Note: If a security code has been created for the monitor, you will be prompted to enter it before you
can access the Gallery.
SORT THE GALLERY
• Tap the up or down arrows by the Sort by Date icon. When an arrow is selected, it is highlighted and
underlined with a white line.
Oldest on topNewest on top
SELEcT FILES
1. Tap and hold the file, or tap the check box directly. A file is selected when a mark appears in the check box at
the upper left corner of the thumbnail. Repeat to select additional files, or to deselect a file.
1:15

Verathon GlideScope Core Specifications

General

Brand	Verathon
Model	GlideScope Core
Category	Medical Equipment
Language	English