EasyManua.ls Logo

Verderflex Ds500+ - Interim Storage before Using the Pump; Figure 2. - Lifting; Figure 1. - Box Contents; Storage Conditions

Default Icon
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 | Page
Version 00
© Verder Liquids B.V
Ds500, Ds500+ Operating manual
Original instructions (en)
4. Transport, Unpacking and
Storage
4.1 Transport
Always transport the unit in the upright orientation and
ensurethatthepumpissecurelypackedinthebox.
4.2 Unpacking
Contentsofbox:
Figure 1. - Boxcontents
Item Description Item Description
1 Pump 2 Leaetwithserial/
USB
3 Cartridge
4
Tube connection kit
x2
5 Screwttings
(2pcs)
6 Hosetailtting
7 O-rings (2pcs)
Table 4. - Boxcontents
Report any missing items or transport damage to the
manufacturer/ distributor immediately.
Retain the packaging if returning any parts.
Packaging (outer carton and foam) can be recycled - check
local recycling guidelines and facilities.
4.3 Lifting
CAUTION
Risk of damage to pump by incorrect lifting
Figure 2. - Lifting
X Do not lift the pump by the screen module or cartridge
3
6
7
4
5
2
1
4.4 Storage Conditions
1. Make sure the storage location meets the following
conditions:
Dry
Out of direct sunlight
Frost-free;temperaturerange-5°to+45°C
Vibration-free
Dust-free
2. Thecartridgeshouldbestoredintheboxitwassuppliedin
foramaximumof2years.
4.5 Interim Storage Before Using the
Pump
CAUTION
Risk of pump damage if stored incorrectly
X Please observe the storage recommendations and use
by dates which apply to the cartridge that you may wish
to bring into service after storage.
X Allow the pump and cartridge to reach ambient
temperature before use.

Table of Contents

Related product manuals