Verderflex Ds500+ - Page 6

6 | Page
Version 00
© Verder Liquids B.V
Ds500, Ds500+ Operating manual
Original instructions (en)
In accordance with the UK Supply of Machinery (Safety) Regulations 2008, No 1597 ANNEX II, Part I, Section B
We,
VERDER Ltd., Unit 3 California Drive, Castleford
hereby declare that the following machine adheres to the relevant UK legislation detailed below:
Designation
Manufacturer VERDER Ltd.
Unit 3 California Drive
Castleford
WF105QH
UK
Date: Company Stamp / Signature:
Anthony Beckwith
HeadofEngineering
The following designated standard(s) has been applied:
UK Legislation:
BSEN61326-1:2013-Electricalequipmentformeasurement,controlandlaboratoryuse.EMCrequirements-General
requirements
ETSI EN 301 489-1 V2.1.1 - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part1:Commontechnicalrequirements.
ETSI EN 301 489-17 V3.1.1 - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part17:SpecicconditionsforBroadbandDataTransmissionSystems.
Supply of Machinery (Safety) Regulations 2008
UKSI2012-3032-TheRestrictionoftheUseofCertainHazardousSubstancesinElectricalandElectronicEquipment
Regulations 2012
UKSI2017-1206-TheRadioEquipmentRegulations2017
The pump, to which this declaration refers, may only be put into operation after it has been installed in the way prescribed
by the manufacturer and, as the case may be, after the complete system of which this pump forms part, has been made to
fulltherequirementsofTheSupplyofMachinery(Safety)Regulations2008.
(UK)Declaration of Conformity
Ds500
Ds500+
02/ 09/ 2022