This chapter describes the setup procedures for the P630 in the
following sections:
• Device Location
• PIN Protection Measures
• Inside the Shipping Carton
• SAM/TF Cards
• Power Supply
• Cable Connections
• Smart Card Reader
• Magnetic Stripe Card Reader Use
• Contactless Transactions
• Optional Accessories
• Periodic Inspection
Following are the guidelines used to select an ideal location for the
terminal.
• Select a location convenient for both merchant and cardholder.
• Select a at support surface, such as a countertop or table, or
mount it on a mounting stand supplied by Verifone.
• Select a location near a power outlet, POS, ECR, or computer
connected to the terminal. Do not string cables or cords across a
walkway for safety.
• Do not use the unit where there is high heat, dust, humidity,
moisture, caustic chemicals, or oils.
• Keep the unit away from direct sunlight and anything that radiates
heat, such as a stove or a motor.
To Next Page