VeriFone P630 - Mounting P630 without Mounting Plate; Mounting P630 with Mounting Plate to a Vertical Bracket

Installation Guide P630
34
© Verifone Inc. All rights reserved.
Mounting P630 to a Flat
Surface (Without a
Mounting Plate)
To mount the terminal to a at surface:
1.
Align the terminal's footers to the holes on the mounting
plate.
2.
Fit the footers of the terminal into the footer holes.
3.
Screw the mounting plate in place.
NOTE
Customized plates must have four recessed areas big enough to t the footers
of the terminal. This ensures that there is no gap between the terminal and
mounting plate.
Mounting P630 with
Mounting Plate to a Vertical
Bracket
To mount the terminal with a mounting plate to a vertical bracket:
1.
Ensure the mounting plate is attached to the terminal.
2.
Align the three screw holes of the mounting plate with the vertical
bracket holes.
3.
Screw the vertical bracket in place.
Mounting Considerations
Avoid having metallic objects in proximity to the contactless antenna.
If you need to mount the terminal to vertical or inclined surfaces,
use a at mounting plate.
CAUTION
An enclosed metal frame or mount may negatively affect CTLS performance.