VeriFone T650T - 2. Device Setup; Environmental Factors; Contactless Considerations

13
© VeriFone, Inc. All rights reserved.
Installation Guide T650T
2. Device Setup
This chapter describes the setup procedure. You will learn about:
• Environmental Factors
• PIN Protection Measures
• Inside the Shipping Carton
• Device Features
• Connection Ports
• SAM CARD
• Removing the Battery Cover
• Installing or Replacing SIM/SAM Card
• Initial Battery Charging
• Starting Up and Shutting Down
• Using the Battery
• Examining Connection Port
• Loading a Paper Roll in Device
• Using the Smart Card Reader
• Using the Magnetic Card Reader
• CTLS Transaction
• Camera/QR Code Reader
• Wi-Fi/BT Support
Environmental
Factors
• Do not use the device where there is excess heat, dust, humidity, moisture,
caustic chemicals or oils.
• Keep the device away from direct sunlight and anything that radiates heat.
Contactless
Considerations
Avoid having metallic objects in proximity of the contactless antenna. If you need
to mount the device onto a vertical or inclined surface, use Verifone approved
stand.
Using an enclosed metal frame or mount may negatively affect contactless
performance.
L'utilisation d'un cadre ou d'un support métallique fermé peut affecter
négativement les performances sans contact.