14
© VeriFone, Inc. All rights reserved.
Installation Guide T650T
PIN Protection
Measures
Use the following techniques to provide effective screening of the PIN-entry
keypad during the PIN-entry process. You can use these methods in combination,
although in some cases a single method might suffice.
• Position the device on the check-in stand in such a way as to block visual
observation of the PIN-entry process. Examples include:
• Visual shields designed into the check-in stand. The shields may be solely
for shielding purposes or may be part of the general check-in stand design.
• Position the angle of the device in such a way that PIN spying is difficult.
• Install the PED (PIN Entry Device) on an adjustable stand that allows
consumers to swivel the device sideways and/or tilt it forward/backward to a
position that makes visual observation of the PIN-entry process difficult.
• Position in-store security cameras so that the PIN-entry keypad is not visible.
Verifone also recommends instructing the cardholder regarding safe PIN-entry.
This can be done with a combination of:
• Signage on the PED
• Prompts on the display, possibly with a click-through screen
• Literature at the point of sale
• A logo for safe PIN-entry process
Inside the
Shipping
Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The device is a secure product. Tampering causes it to cease
to function or to operate in an unsecured manner.
Unpacking the
Shipping Carton
To unpack the shipping carton:
1 Carefully inspect the shipping carton and its contents for possible tampering or
damage.
2 Validate the authenticity of the sender by verifying the shipping tracking
number and other information located on the product order paperwork.
3 Remove and inspect the contents of the shipping carton. The device ships in
multiple configurations, the carton may include all or any of the following:
• Device with Battery/without Battery variant
• Connectivity cable
• Paper roll