ACCESS
CONTROL
2. Select a security level by clicking one of the radio buttons.
Using the Minimum Security setting may expose the local
network to significant security risks, and should only be
used for short periods of time to allow temporary network
access.
3. Click Apply to save changes.
7.1/ ACCESS CONTROL
You can block individual computers on your local network from
accessing specific services on the Internet. For example, you
could block one computer from accessing the Internet, then block
a second computer from transferring files using FTP as well as
prohibit the computer from receiving incoming email.
Access control incorporates a list of preset services, such as
applications and common port settings.
7.1a/ ALLOW OR RESTRICT SERVICES
To allow or restrict services:
1. From the Firewall page, select Access Control. The
Access Control page opens with the Allows and Blocked
sections displayed. The Allowed section only displays
when the firewall is set to maximum security.
To Next Page
Loading...
Need help?
General
