Verizon Fios-G2100 User Manual

COMPUTER NETWORK
CONFIGURATION
2.1a/ CONFIGURING DYNAMIC IP ADDRESSING
To configure a computer to use dynamic IP addressing:
WINDOWS 7/8
1. In the Control Panel, locate Network and Internet, then
select View Network Status and Tasks.
2. In the View your active networks – Connect or disconnect
section, click Local Area Connection in the Connections
field. The Local Area Connection Status window displays.
3. Click Properties. The Local Area Connection Properties
window displays.
4. Select Internet Protocol Version 4 (TCP/IPv4), then click
Properties. The Internet Protocol Version 4 (TCP/IPv4)
Properties window displays.
5. Click the Obtain an IP address automatically radio button.
6. Click the Obtain DNS server address automatically radio
button, then click OK.
7. In the Local Area Connection Properties window, click OK
to save the settings.
8. To configure Internet Protocol Version 6 (TCP/IPv6) to
use dynamic IP addressing, repeat step 1 to 7. However for
step 3, select Internet Protocol Version 6 (TCP/IPv6) in
the Properties option (refer to IPv6 section for Fios Router
configuration).

Verizon Fios-G2100 Specifications

General

Brand	Verizon
Model	Fios-G2100
Category	Wireless Router
Language	English