DMZ HOST
Warning: Enabling DMZ Host is a security risk. When a device on your
network is a DMZ Host, it is directly exposed to the Internet and loses much
of the protection of the firewall. If it is compromised, it can also be used to
attack other devices on your primary network.
Follow these steps to designate a device on your primary network as
a DMZ Host:
1. From the Firewall page, select DMZ Host
2. Select Enable for the DMZ Host
3. Enter the IP address of the device you want to designate
as the DMZ Host
4. Click Apply
To Next Page
Loading...
Need help?
General
