STATIC NAT AND
SECURITY LOG
3. Select a source address in the Specify Address field or
enter an IP address in the text box.
4. Enter the public IP address.
5. If using port forwarding, select the Enable Port
Forwarding for Static NAT check box.
6. Click Apply to save changes.
7. Repeat these steps to add additional static IP addresses.
7.7/ SECURITY LOG
You can view events that your firewall has blocked by accessing
the security log. Your Fios Router reports events, such as attempts
to establish inbound and outbound connections, attempts to
authenticate at an administrative interface, such as your Fios Router
GUI, firewall configuration, and system start-up.
To Next Page
Loading...
Need help?
General
