Verizon Fios-G2100 - Remote Administration

PORT TRIGGERING AND
REMOTE ADMINISTRATION
To resolve the conflict, a port triggering entry must be defined,
which allows inbound trac on UDP port 3333 only after a network
host generated trac to UDP port 2222. This results in your Fios
Router accepting the inbound trac from the gaming server and
sending it back to the network host which originated the outgoing
trac to UDP port 2222.
To configure port triggering:
1. Select Port Triggering.
2. To add a service as an active protocol, click Add. The Edit
Port Triggering Rule page displays.