84
verizon.com/fios | ©2016 Verizon. All Rights Reserved.
/ USING NETWORK
CONNECTIONS
GENERAL
Verify the following information:
• Status - displays the connection status of the network.
• Network – displays the type of network connection.
• Connection Type - displays as Hardware Ethernet Switch.
• Physical Address - displays the physical address of the
network card used for the network.
• MTU - specifies the largest packet size permitted for
Internet transmissions:
– Automatic - sets the MTU (Maximum Transmission Unit
at 1500)
– Automatic by DHCP - sets the MTU according to the
DHCP connection
– Manual - allows you to manually set the MTU to be set.
• HW Switch Ports - displays the status of each Local
Network Ethernet port.
6.3/ WIRELESS ACCESS POINT CONNECTION
A Wireless Access Point network connection allows wireless
devices to connect to the local area network (LAN) using the 2.4
GHz or 5 GHz Wi-Fi network.
Note: Once disabled, all wireless devices connected to that wireless
network will be disconnected from the LAN network and Internet.
To Next Page
Loading...
Need help?
General
