Need help?Do you have a question about the Vernier LabQuest 2 and is the answer not in the manual?
Guide on initial setup, battery charging, and tab removal for first-time use.
Steps for basic data collection, including powering on and connecting sensors.
Details on powering on, sleep/wake, shut down, and emergency shutdown functions.
Description of analog, digital sensor ports, and USB port for connectivity.
Overview of built-in sensors like GPS, accelerometer, temperature, light, and microphone.
Managing LabQuest files (New, Open, Save, Export, Print, Settings, Quit).
Setting up and controlling data collection modes and parameters for experiments.
Configuring connected and internal sensors for accurate data collection.
Connecting Go Direct, Go Wireless, and WDSS devices for data acquisition.
Methods for examining, adjusting, and analyzing collected data using various tools.
Overview of wirelessly streaming data to other devices for collaborative analysis.
Steps to connect LabQuest to Wi-Fi and enable data sharing for real-time access.
Setting up an ad-hoc Wi-Fi network for data sharing without internet access.
Activating the data sharing feature on the LabQuest device for remote access.
Instructions for connecting computers or mobile devices to LabQuest for data access.
General| Connectivity | USB, Bluetooth, Wi-Fi |
|---|---|
| Dimensions | 22.9 cm x 15.2 cm x 3.5 cm |
| Weight | 0.68 kg |
| Power | Rechargeable lithium-ion battery |
| Digital Channels | 2 |
| Processor | ARM Cortex-A8 |
| Memory | 512 MB RAM |
| Data Collection Rate | Up to 100, 000 samples per second |
| Storage Temperature | -20 °C to 60 °C |
| Display | Color LCD |
| Sampling Rate | 100, 000 samples per second |
| Operating Temperature | 0°C to 45°C |
| Operating System | Linux-based |
| Sensors Supported | Vernier sensors |
To Next Page
