⚫ High-end Fault diagnostic system to facilitate easy equipment maintenance
Figure 1-9 shows the image of the micro-controller:
Figure 1-9 Display panel of the Controller
1.4.9 Condenser
The Liebert range of air condensers offers many advantages, some of which are listed below:
⚫ Sharp and Powerful design
⚫ Antirust aluminum cabinets
⚫ Low sound levels
⚫ High reliability over a wide range of ambient conditions
Figure 1-10 shows the image of the condenser used in the CR012:
Figure 1-10 Condenser
For more information on the condenser, refer to the Liebert LSF Condenser User manual.
1.5 Optional Equipment
The Liebert CR012 is compatible with multiple temperature/humidity sensors based on the requirement.
An interesting development is the compatibility with the Liebert CR012 models with the Modbus protocol. Through the
configured RS 485 port or TCP/IP port, the CR012 systems can communicate with the host computer in addition to
remotely taking charge of the host software.
1.6 Working Conditions
In this section, look at the environmental conditions including the Operating and Storage environment.
1.6.1 Operating Condition
Table 1-4 defines the Operating condition parameters including the Ambient Temperature, Protection level, Altitude,
and Voltage range.
To Next Page