Vertiv Liebert CR012 - 1.4 Main Components of Indoor Unit

Liebert CR012 Precision Air Conditioning User Manual
Chapter 1 Introduction 3
Figure 1-3 Components and their locations
Table 1-2
Item
Description
Item
Description
1
Top electrical entrance
7
Condensate pump
2
Electric box
8
Bottom electrical entrance
3
Top condensate-pump drain
9
Bottom condensate-pump drain
4
Supply and Return
10
Evaporator Coil
5
EC plug fans
11
Compressor
6
Electric heaters
Table 1-3
Model
Dimensions (W x D x H) (mm)
CR012HA1380S02E30000PV000
300 x 1100 x 2000
CR012RA1380S10E30000PV000
1.4 Main Components of Indoor Unit
The following section expounds the list of components used in the Liebert CR012 Precision Air conditioners.
1.4.1 DC Brushless Compressor
The Liebert CR012 models comprise of a DC Brushless compressor which has a host of promising features as
mentioned in the following list:
⚫ Low operational noise
⚫ Rapid Cooling
⚫ Less Vibration
Moreover, there are no brushes compared to typical DC motors. Its compactness, reliability, longer lifetime, and better
capacity control combined with streamlined energy-efficiency make it an ideal compressor for the CR012.
Figure 1-4 shows the image of a DC brushless compressor: