What does it mean if the SPD red LED is illuminated on Vertiv Industrial Equipment?
If the red LED is illuminated on the SPD of your Vertiv Industrial Equipment, it indicates that a surge exceeding the SPD's rating has occurred. Replace the SPD and inspect other components for damage, replacing them if necessary.
Describes the MCV condenser as an air-cooled heat rejection unit.
Guidelines and warnings for refrigerant piping and system charging.
Details acceptable and unacceptable power supply configurations.
Explains EconoPhase systems for precision air conditioning and energy savings.
Describes how EconoPhase operation controls temperature based on outdoor conditions.
Guidelines for cleaning standard condenser coils for efficiency.
Procedures for quarterly cleaning of E-coat coils and cabinets.
Step-by-step instructions for replacing a condenser EC fan.
Steps to replace the premium efficiency control board.
General| Power Rating | 330 kVA |
|---|---|
| Input Voltage | 400V |
| Voltage | 400V |
| Frequency | 50/60 Hz |
| Phase | 3 |
| Topology | Double Conversion |
| Type | Uninterruptible Power Supply (UPS) |
| Output Voltage | 400V |
| Communication Interfaces | Modbus, USB |
| Operating Temperature Range | 0°C to 40°C |
To Next Page
