Vertiv Liebert XDC - Removing the Unit from the Piano Jacks

Figure 2.5 Securing the Liebert XDC to piano jacks
2.3.6 Removing the Unit from the Piano Jacks
1. Lower the Liebert XDC as far as the piano jacks will allow.
2. Undo all strapping holding the piano jacks to the unit.
3. Lift one end of the Liebert XDC off one piano jack with a pry bar or similar device, taking care
not to damage the unit’s cabinet.
4. Repeat step 3 to remove the piano jack from under the opposite end of the Liebert XDC.
5. Remove all material used to protect the unit from the piano jacks and strapping.
Vertiv | Liebert® XDC™ User Manual | 14