NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
Automatically generated index object.
Converter product number.
Converter hardware revision.
Converter software revision.
Converter physical location identifier.
The type of alarm change.
(1) activated
(2) deactivated
Control battery test, start (1), stop (0).
Control relay8, close (1), open (0).
Control relay7, close (1), open (0).
Control relay6, close (1), open (0).
Control relay test, start (1), stop (0).
Table of indexed equipment signal values.
equipmentSignalTableEntry
An entry (conceptual row) in the equipment signal table.
psEquipmentSignalTableEntryIndex
The unique sequence number of this equipment signal.
Indexed equipment signal value.
The sequence number of last submitted alarm trap, also last row in
alarmTrapTable.
Table holding information about the currently active alarms.
An entry (conceptual row) in the alarm trap table.
The unique sequence number of this alarm trap.
To Next Page
Loading...
Need help?
General
