Refitting the front wheel
- Upon refitting, tighten the five screws to the pre-
scribed torque.
Locking torques (N*m)
Wheel rim screws 20 to 25
Handlebar
Removal
Remove the handlebar cover before carrying out
this operation,.
- After removing the transmissions and discon-
necting the electrical terminals, remove the termi-
nal fixing the handlebar to the steering.
- Check all components and replace faulty parts.
N.B.
IF THE HANDLEBAR IS BEING REMOVED TO REMOVE
THE STEERING, TILT THE HANDLEBAR FORWARD TO
AVOIDING DAMAGING THE TRANSMISSIONS.
Refitting
Carry out the removal operations but in the reverse
order, observing the prescribed tightening torque.
Locking torques (N*m)
Handlebar lock nut 45 to 50
Steering column
Vespa LX 125 - 150 i.e. Suspensions
SUSP - 189
To Next Page
Loading...
Need help?
General