Vespa LX Series User Manual

Aesthetic inspection
Appearance check:
- Paintwork
- Fitting of plastics
- Scratches
- Dirt
Tightening torques inspection
Lock check
- Safety locks
- Fixing screws
Safety locks
•
Rear shock absorber upper retainer
•
Rear shock absorber lower clamping
•
Front wheel axle nut
•
Front wheel screws
•
Wheel hub nut
•
Front brake calliper fixing screws
•
Swinging arm - chassis pin
•
Engine-swinging arm pin
•
Engine arm pin - Chassis arm
•
Handlebar lock nut
•
Lower steering ring nut
•
Upper steering ring nut
Electrical system
Electrical system:
- Main switch
- Headlamps: high-beam lights, low-beam lights, tail and parking lights and their warning lights
- Adjusting the headlights according to the regulations currently in force
- Rear light, parking light, stop light
- Front and rear stop light switches
- Turn indicators and their warning lights
- Instrument panel lights
- Instrument panel: fuel gauge
- Instrument panel warning lights
Vespa LX 125 - 150 i.e. Pre-delivery
PRE DE - 223

Vespa LX Series Specifications

General

Displacement	124 cc
Cooling System	Air-cooled
Front Tire	110/70 - 11"
Rear Tire	120/70 - 10"
Seat Height	785 mm
Kerb Weight	114 kg
Wheelbase	1, 280 mm
Length	1, 770 mm
Width	705 mm
Height	1, 140 mm
Engine Type	Single-cylinder, 4-stroke
Fuel System	Carburetor
Max Torque	10.4 Nm @ 6, 000 rpm
Transmission	Automatic
Front Suspension	Single-sided trailing arm with hydraulic shock absorber
Rear Suspension	Hydraulic shock absorber
Front Brake	200mm disc brake
Rear Brake	110mm drum brake