Connect the turbocharger lubrication oil delivery pipe to the crank-
case and tighten the connector to the recommended torque.
Engine oil supply pipe to turbo - crankcase
Connector M10 (daNm) 4.5 ÷ 5.5
Connect the turbocharger lubrication oil outlet pipe to the sump
and tighten the bolts to the recommended torque.
Engine oil supply pipe from turbo
Bolt M6 (daNm) 0.8 ÷ 1.0 (engine block side)
Place the alternator in position and secure it by tightening the
bolts to the recommended torque.
Alternator
Bolt M12x1.25x120 (daNm) 6.3 ÷ 7.7
Bolt M10x1,25x100 (daNm) 4.5 ÷ 5.5
To Next Page
Loading...
