Assembly - attachment
40
Friction clutch
Safety in connection with maintenance work on the machine
When working on the machine the tractor must be stopped and
secured.
This prevents the PTO shaft from suddenly starting to rotate.
If the tractor and the PTO shaft have not been connected in
accordance with the instructions, serious accidents causing damage
to limbs can occur.
When working on the machine:
• The tractor engine must be stopped.
• The ignition key must be removed.
• The tractor's PTO must be disconnected.
• The tractor hydraulic system must be disconnected.
• The hand brake must be activated.
Only carried out when
staring for the first time
The friction clutch is bled in the following way:
Open the guard and remove the PTO shaft with the friction clutch.
Tighten all bolts on the friction clutch.
Fit and fasten the friction clutch on the machine.
To Next Page
Loading...
